#PDSDK2.0######################################################################
# NOTE - Configuration definitions must be in the format
#        of "attribute = value"; the single space before
#        and after the '=' is required.
#
#        On Windows: A partition identifier and slash must precede the
#                    DEBUGLOG file name.
#        On Unix: A slash must precede the DEBUGLOG file name.
#
# Debug Log Definition
# NOTE - A date stamp will be added in front of the daily rollover log filename.
#        e.g. C:\yymmdd_pdplugin.log
# Windows:
# DEBUGLOG = C:\pdplugin.log
# Unix:
# DEBUGLOG = /var/log/puredisk/pdplugin.log
#
# Debug Log Verbosity Level (0-10, 0=Least, 10=Most)
LOGLEVEL = 0
#
# Debug Log File Max Size (MB, 1-2048)
MAX_LOG_MBSIZE = 100
#
# Determines if server-side settings from storage unit should be used
# 0 - Server settings can override local pd.conf settings
# 1 - Local pd.conf settings will always be used; server settings are ignored
LOCAL_SETTINGS = 0
#
# Compression (0=Disabled, 1=Enabled)
COMPRESSION = 1
#
# Encryption (0=Disabled, 1=Enabled)
ENCRYPTION = 0
#
# Optimized-duplication timeout (minutes)
OPTDUP_TIMEOUT = 720
#
# Optimized-duplication max bandwidth (KiB/s, 0=No Limit)
OPTDUP_BANDWIDTH = 0
#
# Optimized-duplication compression (0=Off, 1=On)
OPTDUP_COMPRESSION = 1
#
# Optimized-duplication encryption (0=Off, 1=On)
OPTDUP_ENCRYPTION = 0
# 
# Maximum amount of memory to use for fingerprint caching (MB)
FP_CACHE_MAX_MBSIZE = 20
#
# Maximum number of images to load for fingerprint caching (0-4096)
FP_CACHE_MAX_COUNT = 1024
#
# Load fingerprint cache during incremental or synthetic backups (0=Off, 1=On)
FP_CACHE_INCREMENTAL = 0
#
# Load fingerprint cache if on local storage server (0=Off, 1=On)
FP_CACHE_LOCAL = 1
#
# Load fingerprint cache from specified existing client/policy.
# Parameters are:
#   clienthostmachine is the exact host name shown within the backup policy
#   backuppolicy is exact backup policy name to be used for caching
#   date is the last day to use this configuration setting (mm/dd/yyyy)
# FP_CACHE_CLIENT_POLICY = clienthostmachine,backuppolicy,date
#
# Segment size for main data backup stream (KB)
# Size must be a multiple of 32 and fall in the range 32-16384
SEGKSIZE = 128
#
# Segment size for meta data streams (KB)
# Size must be a multiple of 32 and fall in the range 32-16384
META_SEGKSIZE = 16384
#
# Don't segment files with these suffixes
# DONT_SEGMENT_TYPES = mpeg,jpg,mp3
#
# Preferred segment size in KB for different file types
# edb = Exchange, mdf,ldf = MS SQL snapshot, segsize64k = MS SQL stream
PREFERRED_EXT_SEGKSIZE = edb:32,mdf:64,ndf:64,segsize64k:64
#
# Max bandwidth backup/restore (KiB/s, 0=No Limit)
BANDWIDTH_LIMIT = 0
#
# Max image fragment size allowed (MB)
MAX_IMG_MBSIZE = 51200
#
# Specify the local NIC for backup/restore
# BACKUPRESTORERANGE = 192.168.1.1/32
#
# PDDO web service retry count
WS_RETRYCOUNT = 3
#
# PDDO web service call timeout (seconds)
WS_TIMEOUT = 120
#
# Agent side decryption and decompression on restore (0=off, 1=on)
RESTORE_DECRYPT_LOCAL = 1
#
# Buffer size to use when prefetching data for restore operations (B)
PREFETCH_SIZE = 33554432
#
# Time interval for retrieving stats from CR (seconds)
# By default 0 is used to disable caching and retrieve stats on demand.
# Longer intervals may help with larger concurrency.
CR_STATS_TIMER = 0
#
# Enable the fiber channel for backup/restore. 0 is disable, 1 is enable.
# FIBRECHANNEL = 0
#
# Run backups through the multi-threaded streaming agent (1=On, 0=Off)
MTSTRM_BACKUP_ENABLED = 0
#
# If set, limits backups using the multi-threaded agent to specified clients
# Format is a comma-separated list of clients, treated as case insensitive
# MTSTRM_BACKUP_CLIENTS = client1,client2,client3
#
# If set, limits backups using the multi-threaded agent to specified policies
# Format is a comma-separated list of policy names, treated as case sensitive
# MTSTRM_BACKUP_POLICIES = policy1,policy2,policy3
#
# Number of seconds to wait for responses from the multi-threaded streaming 
# agent before timing out with an error (1-86400)
MTSTRM_IPC_TIMEOUT = 1200
#
# Interval (seconds) that specifies how often we should perform a keep-alive
# on idle sockets.  By default, the plugin will attempt to determine a suitable
# value based on network resiliency settings.
# Allowed values: 60-7200 seconds. 0 = disabled
# FILE_KEEP_ALIVE_INTERVAL=1440
#
# Client side rebasing threshold (MB), when image data in container less than the threshold,
# all of the image data in this container will be resent to server to achieve good locality
# Allowed values: 0-50 MB if the maximum container size is 64 MB,
# 0-200 MB if the maximum container size is 256 MB. 0 = disabled
FP_CACHE_REBASING_THRESHOLD = 4
#
# Period client side rebasing threshold (MB).
# The period client side rebasing will run each period, and it works same with client side 
# rebasing except period client side rebasing using large threshold
# Allowed values: 0-50 MB if the maximum container size is 64 MB,
# 0-200 MB if the maximum container size is 256 MB. 0 = disabled
FP_CACHE_PERIOD_REBASING_THRESHOLD = 16